Our power grid is antiquated beyond its limits. We wouldn’t need programs like GridEx II if we used free-alternative energy.
Ready for GridEx II? GridEx II is a mock exercise to “rehearse” a crisis response in the event of a US power grid failure.
This sounds a bit like a sci-fi novel, doesn’t it? Or somebody’s nightmare …
I guess it is a good thing that “practice drills” like GridEx II are now recognized as a practical and preventative step in case the power grid goes off-line, but with that said, the time, effort, and money spent on this program could be channelled into much better ways of dealing with a power grid disaster.
And, GridEx II is open only to registered industry participants and federal stakeholders. No media or citizen observers will be allowed in the exercise supposedly “to ensure confidentiality and integrity of the scenario.”
Seriously?
Old And Broken Down
Our energy grid today is old and broken down..
Today’s energy grids are antiquated, to say the LEAST. We need to abandon them, and start anew.
Above ground electric lines, oil and gas production, single-car families, dams and hydroelectric plants, and nuclear power plants have been used for far too long to power the masses. Modern power grids are well past their prime.
Instead of struggling to “preserve” out-of-date energy production, ALL global societies, particularly gluttonous Americans, need to get off the old grid and fire up more evolved systems – energy production that is more in synch with the free energy Nature provides the entire planet.
Energy For Profit
The radiation threat at Fukushima is a perfect example of how antiquated, and dangerous, our current system is.
Technically, all energy is free to everyone – or certainly should be. It’s logical to pay for the convenience, but NOT for the right to have it.
The costs of energy have become quite the business these days. Over time, energy for profit has created monopolies, and this is causing the “disasters” we must now plan for when the old grids go down.
So, GridEx II is a good program for dealing with the old and highly-susceptible grid, but moving off this grid into alternative and FREE energy is the next smart move.
Free Energy
Many of the “discoveries” below were never given the chance to be perfected on the market because their patents were bought up and silenced long before the public knew about them.
They may have some “kinks” to iron out, but once they become public domain, a new generation of inventors will surely mainstream their efficiency.
Radiant Energy
Nikola Tesla’s magnifying transmitter, T. Henry Moray’s radiant energy device, Edwin Gray’s EMA motor, and Paul Baumann’s Testatika machine all run on radiant energy. This natural energy form can be gathered directly from the environment or extracted from ordinary electricity by the method called fractionation. Radiant energy can perform the same wonders as ordinary electricity, at less than 1% of the cost.
The Methernitha Community in Switzerland currently has 5 or 6 working models of fuelless, self-running devices that tap this energy.
Permanent Magnets
Dr. Robert Adams (NZ) has developed astounding designs of electric motors, generators and heaters that run on permanent magnets. One such device draws 100 watts of electricity from the source, generates 100 watts to recharge the source, and produces over 140 BTU’s of heat in two minutes.
Dr. Tom Bearden (USA) has two working models of a permanent magnet powered electrical transformer. It uses a 6-watt electrical input to control the path of a magnetic field coming out of a permanent magnet. By channeling the magnetic field, first to one output coil and then to a second output coil, and by doing this repeatedly and rapidly in a “ping-pong” fashion, the device can produce a 96-watt electrical output with no moving parts. Bearden calls his device a Motionless Electromagnetic Generator, or MEG. Jean-Louis Naudin has duplicated Bearden’s device in France. It takes exactly the same amount of energy to spin the fan whether it is generating heat or not.
Cold Fusion
In March 1989, two chemists from the University of Utah (USA) announced that they had produced atomic fusion reactions in a simple tabletop device. The claims were “quickly debunked” within six months, and the public lost interest. Nevertheless, cold fusion is very real.
Not only has excess heat production been repeatedly documented, but also low energy atomic element transmutation has been catalogued, involving dozens of different reactions. This technology definitely can produce low cost energy and scores of other important industrial processes.
Implosion/Vortex
All major industrial engines use the release of heat to cause expansion and pressure to produce work, like in your car engine. Nature uses the opposite process of cooling to cause suction and vacuum to produce work, like in a tornado. Viktor Schauberger (Austria) was the first to build working models of implosion engines in the 1930’s and 1940’s.
Since that time, Callum Coats has published extensively on Schauberger’s work in his book Living Energies and subsequently, a number of researchers have built working models of implosion turbine engines. These are fuelless engines that produce mechanical work from energy accessed from a vacuum.
There are also much simpler designs that use vortex motions to tap a combination of gravity and centrifugal force to produce a continuous motion in fluids.
Super-Efficient Electrolysis
The implication here is that unlimited amounts of hydrogen fuel can be made to drive engines (like in your car) for the cost of water. Even more amazing is the fact that a special metal alloy was patented by Freedman (USA) in 1957 that spontaneously breaks water into hydrogen and oxygen with no outside electrical input and without causing any chemical changes in the metal itself. This means that this special metal alloy can make hydrogen from water for free, forever.
Water can be broken into hydrogen and oxygen using electricity. Standard chemistry books claim that this process requires more energy than can be recovered when the gases are recombined. This is true only under the worst case scenario. When water is hit with its own molecular resonant frequency, using a system developed by Stan Meyers (USA) and again recently by Xogen Power, Inc., it collapses into hydrogen and oxygen gas with very little electrical input. Also, using different electrolytes (additives that make the water conduct electricity better) improves the efficiency of the process dramatically.
Mechanical Heaters
There are two classes of machines that transform a small amount of mechanical energy into a large amount of heat. The best of these purely mechanical designs are the rotating cylinder systems designed by Frenette (USA) and Perkins (USA). In these machines, one cylinder is rotated within another cylinder with about an eighth of an inch of clearance between them. The space between the cylinders is filled with a liquid such as water or oil, and it is this “working fluid” that heats up as the inner cylinder spins. Another method uses magnets mounted on a wheel to produce large eddy currents in a plate of aluminum, causing the aluminum to heat up rapidly. These magnetic heaters have been demonstrated by Muller (Canada), Adams (NZ) and Reed (USA).
All of these systems can produce ten times more heat than standard methods using the same energy input.
Back To The Future
Once we return to depending on natural energy, we will set ourselves free from human profit and control.
Why must have ONLY ONE form of energy today?
If one part of the grid goes down, another alternative grid can still be working. There’s a world of free energy out there. The key is to keep them ALL in the public domain!
Who’ll have the “power” then??
